2022 Ronstan Marine Catalogue - VIEW CATALOGUE

PHOTO CREDIT:© Ana Sutej
 

RC63286

Features

  • Track rails, rigid profile, marine grade aluminium (AL6061-T6), black anodised to 25Ķm.
  • Track rails available in standard straight and curved lengths easily adapted to suit many workboat deck plans.
  • 90-degree corner, 500mm radius bend can be trimmed to adapt to the required angle. These are primarily used for corners found at the front of the cabin.
  • 90-degree corner, 125mm radius bend. These tight radius corners are excellent for applications where track rails need to traverse around sharp corners.
  • 15-degree track trail deflection lengths. These can be used where angle changes occur along the cabin side.
  • Cars have strong grade 316 stainless steel bodies with flared sides and angled stainless steel wheels with ball bearings to provide high load capacity, smooth operation, and require minimal maintenance.
  • Cars are available in free running and plunger lock configurations with large lanyard take off points for easy attachment.
'2' LEFT IN STOCK

$ 99.00


  • Share:

The Ronstan Series 32 I-Beam Safety Rail System is designed to provide the highest level of protection and safety for crew on commercial work boats when working on deck or outside the safety of the vesselís cabin.

The system has been tried and proven on many commercial vessels including but not limited to pilot boats, fire and rescue boats, police and military patrol boats and commercial fishing boats.

The safety rail system provides a method of attachment for use in conjunction with personal fall protection equipment to protect crew against falls and overboard situations and allows freedom to move about the workboat uninhibited and with ease in any sea conditions.

Thoroughly tested in the factory and in the field, Ronstanís Series 32 I-Beam Safety Rail System passes the requirements of the Australian National Standards for Commercial Vessels (NSCV), Part C, Section 1, 6.17.3 (Pilot Launch Ė Equipment) and 6.12.7.5.6 (Clipping point strength).


MODULAR SYSTEM FOR EASE OF SPECIFICATION AND INSTALLATION
To achieve greater economy with the flexibility to adapt, we have created a modular system of standard components that make it easy to design, specify and install these systems to a wide range of commercial vessels.

For designers and builders, 2D drawings are available to assist and ensure itís a Ronstan safety rail system that you next specify. Customised track rails are available for vessels where standard track rail corners are not suitable.


TRACK FASTENINGS
M6 (1/4") countersunk fasteners at 100mm (3 15/16") centres. Unsupported fastening span no greater than 1500mm (59 1/16")
Grade 316 stainless steel fasteners with a nominal minimum strength of 700MPa. Strength of substrate, backing plates, brackets must be designed to support a minimum 600kg (1320lb) load.

STOP HOLES
50mm (2") centres
Length3 7/8 in.
Width in.
Weight9.2 oz.
  • Ideal for use on any vessel where the crew requires high levels of mobility to operate freely on deck, under all conditions
  • Commercial work boats and pilot boats
  • Grade 316 stainless steel car bodies, wheels, bearing races and fixtures
  • Grade AL6061-T6 aluminium alloy track